The leaf screen that removes leaves from itself automatically and sends status messages directly from the roof via FLECK connect.

• Set, consisting of our innovative ROOFGUARD with FLECK connect*
• FLECK connect sends real-time notifications if the ROOFGUARD is triggered at a critical water accumulation height on the flat roof of about 60 mm or if the battery voltage decreases
• A special transmission frequency ensures particularly long ranges
• No external power supply required
• Notes:
  • The module should be registered before installation!
  • The FLECK connect dashboard cannot be opened via the Internet Explorer. It is best to use Google Chrome, Firefox, Safari or Edge as your browser.
  • FLECK connect is currently not yet available in Austria and Benelux.

How the ROOFGUARD with FLECK connect works in 4 steps:

1. In case of normal precipitation, the ROOFGUARD with FLECK connect functions as a conventional leaf screen. The transmitting module is permanently active.
2. From a backed-up water level of approx. 60 mm or higher (e.g. due to heavy rainfall events) the ROOFGUARD mechanism is triggered.
3. The movable buoyancy bodies then move upwards and open the roof drain suddenly, so that leaves or hail are flushed away unimpeded. At the same time as the ROOFGUARD triggers, FLECK connect sends a status email.
4. After the rain event, the ROOFGUARD returns to its original position. FLECK connect sends further information to the user, as soon as the screen element has lowered again at a low water level. In the event of persistent backed-up water > 30 minutes or if the battery voltage is low, a warning email is sent to the user. The owner, roofer or facility manager can then carry out an inspection or maintenance.