THE DIFFERENCE CALCULATED

ROOF SUPER DRY

A granulate for dewatering wet areas within a few minutes, with which up to 70% time is saved and work is enabled even if water continues to flow in. A 800 g can should be kept in every vehicle for spontaneous deployments.

DRYING A ROOF

Without ROOF SUPER DRY

 

With ROOF SUPER DRY

60 MIN. TIME SAVING PER PERSON

In total, up to 70% work time can be saved with ROOF SUPER DRY. On a gravel or green roof this is approx. 25% higher, as without ROOF SUPER DRY, water can repeatedly flow in again.

Leak on the flat roof

Depending on the degree and extent of wetness, drying an area of e.g. 1 m2 requires between 100 and  500 grams of ROOF SUPER DRY sprinkled in a circle around the work area or in it. The area is water-free within 3 – 5 minutes and can then be completely dried with a hot air gun or torch so that the required work can be carried out in the work area. On the other hand, working with cloths, brooms or wet vacuum cleaners takes approx. 70% longer (see example calculation above).

 

Gutter repair work

A leaking seam of a gutter can only be soldered if the area is clean and dry. However, this problem frequently occurs in older gutters that already contain water. With ROOF SUPER DRY, the gutter seam can be repaired despite standing water by sprinkling the granulate directly into the water to the right and left of the gutter seam. A dam forms that prevents further water from flowing in. The repair work can begin immediately. If the water also flows off the roof into the gutter (for example, because it rained beforehand), the ROOF SUPER DRY can also be used on the tiles or on the fascia. When repairing without ROOF SUPER DRY, roofers frequently need very many cloths that become saturated very quickly, so that they can no longer keep the water back and the time needed for the repair is extended unnecessarily and made more difficult as a result.

EASY USE ON THE ROOF

Unbeatable on flat roofs: areas can be dewatered in 3 – 5 minutes.

Sold out within the shortest time – a product that pays for itself

Carrying out work and repairs, even in wet conditions, is now easier – or at all possible, thanks to ROOF SUPER DRY. It is no longer necessary to dry the whole area, only the area in which work is to be carried out is dewatered:

  • on flat roofs: fast dewatering of work areas
  • on gravel-covered roofs: prevention of further water flowing in
  • in gutters, valleys: back up water or discharge it for soldering/repair work

 

WE ARE THERE FOR YOU IN PERSON

At FLECK your contact will always support you on site.

Find your personal contact now and arrange an appointment for a product presentation.

 

 

 

Our field sales and sales office team is available to answer your questions at any time.